WHERE TO USE

• As an additive to improve the mechanical and adhesive characteristics of cement-based screeds, renders and thin smoothing layers.

• As an additive for highly adhesive cement bonding slurries.

Some application examples

• High strength cement screeds for interior and exterior use.

• As waterproofing coating when applied in minimum 2 coats in combination with cement in the specified ratio of 1 : 4 : 8, i.e, Mapei Planicrete SBR : Water : OPC respectively by volume.

• Cementitious bonding slurry for installing natural stone using the Mapestone system.

• High strength cement renders for interiors and exteriors.

• Cementitious bonding slurry to improve adhesion of conventional bonded screeds and screeds made from Mapecem Pronto or Topcem Pronto.

• Bonding slurry made from Mapecem or Topcem to improve adhesion of bonded screeds made from the same types of binder.

• Adhesive shotcretes for bonding renders.

• Cement mortars for filling holes, reconstructing damaged areas and finishing surfaces on buildings and precast concrete elements.

• Cementitious mortar for finishing off surfaces subjected to high levels of abrasion ( industrial floors, ramps, channels) and for integrating small areas of worn floors.